●Waste Incineration

 

Waste Incinerator

Burning rate from 10kgs per hour to 1000kgs per hour

Double combustion chamber

Smoke Pre-Treatment, Environmentally friendly

Stainless Steel Chimney

Custom Made possible

●Containerized Mobile Incinerators

Containerized waste incinerator is our latest design for market. This incinerator is build in ISO container before leave factory. After customer received container, install the chimney and connect with electric power and setup oil tank, that’s all. Now, the burning capacity can be 10/20/30/50/100/150kgs per hour for ISO 20’feet container. This moveable/mobile incinerator can be move by truck to any site by local customer.Small Containerized Incinerator

This kind of incinerator is good choice for different end-customer site, Service personnel can move to there and service at local site. It is also best service type for family pet cremation service and other emergency status.

● Mounted in ISO Container before leave factory

● Free-installation

● No incineration house build construction,

● Movable by truck

● Custom made with 10/20/30/50/100/150 kgs per hour

●High-temperature Sterilization

Product Code: 150YDA/Horizontal cylindrical pressure steam sterilizer

280200150yda

The steam can’t go through to chamber when the door haven’t close , and the pilot off to inform. You can processing dry operate

When the pressure inner over 0.027Mpa, the door be lock and not be open

If you not choose the sterile time and start machine, buzzer sound

If you mistake open the door in the course of stat, the jacket valve auto off and open the chamber valve

Lack water the pilot on, heating and sterile pilot off, the buzzer sound and auto release steam

Overload and leakage protection, when leakage or over current occur, it auto off the power

Temperature controller not work  and the inner pressure over 0.165Mpa, the safety valve auto start open

Capacity: 150L(D.480mmx850mm)
Working pressure: 0.22MPa
Working temperature: 134℃
Adjustment of temperature: 40-134℃
Timer : 0-60 min

Time for drying: 0-60min

Heat average: ≤± 2 ℃

Power: 380V 50Hz/6Kw

Product Code: 200YDA/Horizontal cylindrical pressure steam sterilizer

Capacity: 200L(D.515mmx1000mm)

Power: 380V 50Hz/9Kw

Product Code: 280YDA/Horizontal cylindrical pressure steam sterilizer

Capacity: 380L(D.600mmx1000mm)

Power: 380V 50Hz/12Kw

Product Code: 400YDA/Horizontal cylindrical pressure steam sterilizer

Capacity: 400L(D.00mmx1100mm)

Power: 380V 50Hz/18Kw

Product Code: 500YDA/Horizontal cylindrical pressure steam sterilizer

Capacity: 500L(D.700mmx1300mm)

Power: 380V 50Hz/18Kw


Product Code: 150YDBH/orizontal cylindrical pressure steam sterilizer (microcomputer control)

280200150ydb

Sterilizing course automatic sterilization controlled by computer, easy to operate.

With drying function, suitable dressing drying.

With over-temperature, over-pressure auto-protect device.

The door opening mechanism cannot be operated until the pressure in the chamber is reduced to 0.027MPa.It can’t be start on if the doesn’t closed well.

The safety value will be open automatically when the inner pressure over 0.24MPa, and the steam be exhausting to the water tank.

The power will be cut-off automatically, cut-off the water and alarm when the machine lacking water.

Capacity: 150L(D.480mmx850mm)
Working pressure: 0.22MPa
Working temperature: 134℃
Adjustment of temperature: 40-134℃
Timer : 0-99 min

Time for drying: 0-99min

Heat average: ≤± 2 ℃

Power: 380V 50Hz/6Kw

Product Code: 200YDB/Horizontal cylindrical pressure steam sterilizer (microcomputer control)

Capacity: 200L(D.515mmx1000mm)

Power: 380V 50Hz/9Kw

Product Code: 280YDB/Horizontal cylindrical pressure steam sterilizer (microcomputer control)

Capacity: 280L(D.515mmx1000mm)

Power: 380V 50Hz/12Kw


Product Code: 150YDC/Horizontal cylindrical pressure steam sterilizer

280200150ydc

The steam can’t go through to chamber when the door haven’t close , and the pilot off to inform. You can processing dry operate

When the pressure inner over 0.027Mpa, the door be lock and not be open

If you not choose the sterile time and start machine, buzzer sound

If you mistake open the door in the course of stat, the jacket valve auto off and open the chamber valve

Lack water the pilot on, heating and sterile pilot off, the buzzer sound and auto release steam

Overload and leakage protection, when leakage or over current occur, it auto off the power

Temperature controller not work  and the inner pressure over 0.165Mpa, the safety valve auto start open

Capacity: 150L(D.480mmx850mm)
Working pressure: 0.22MPa
Working temperature: 134℃
Adjustment of temperature: 40-134℃
Timer : 0-60 min

Time for drying: 0-60min

Heat average: ≤± 2 ℃

Power: 380V 50Hz/6Kw

Product Code: 200YDC/Horizontal cylindrical pressure steam sterilizer

Capacity: 200L(D.515mmx1000mm)

Power: 380V 50Hz/9Kw

Product Code: 280YDC/Horizontal cylindrical pressure steam sterilizer

Capacity: 280L(D.600mmx1000mm)

Power: 380V 50Hz/12Kw

● Waste Crusher

Product Code: SMC-400, Mouth Size: 40x20cm, capacity:300-400kgs per hour, power: 380V 3Kw

400

Product Code: SMC-200, Mouth Size: 27x17cm, capacity:100-200kgs per hour, power: 380V 2.2Kw

200

Product Code: SMC-100, Mouth Size: 28x28cm, capacity:50-100kgs per hour, power: 380V 1.5Kw

100

Product Code: SMC-20, Mouth Size: 23x22cm, capacity:10-20kgs per hour, power: 220V 0.75Kw

20

Product Code: SMC-20M, Mouth Size: 28x32cm, capacity:10-20kgs per hour, power: 220V 0.75Kw

20M

●Needle Destroyer

Product Code:  K300

36s

Needle Destroyer  Scope of application:
Many pipe type plastic tools for medical treatment such as one-off injector, one-off injection acus, one-off scurf acus, one-off transfusion (blood) set etc.
Product function: this machine can quick melt down acus head; lacerate the ampoule of injector and rubber stopper with simple and convenient operation.
Method of use:
1. Put the tri-core electric source into the socket of AC220V; open the switch at behind and the indicator light of electric source turns into red.
2 . The injector with pinhead can plug into the right cutting room to press the injector, push forward; after the pinhead melt, it will hear the sound of the machine working; at this time, the indicator light will be green, push it continually, finish cutting, melting and then recall; last it should be damaged by damage-shape machine.
3 . Scurf acus and other steel acus can plug into the front melt entrance with melting; when operating, it should rotate the pinhead lightly to melt quickly.

Technical Parameter:
Working Electric Current: AC220V 50Hz
Power Consume: 80VA
External Dimension: 200×160×130(mm)
Weight: 3kg

Product Code:  K300A

300a

work with low electric voltage to melt the needle instantly,double over-heated protection is provided.
Surplus liquid in the needle will be vaporized to avoid pollution.
Nearly no spark ejects during operation, the whole process lasts for 1-3 seconds.
Specification:

Power Supply: AC 110V±10% / 220V±10%
Working voltage: AC 6.5V / 12A
Working Noise: :≤50 dB
Power: :≤130VA
Overheating protection temperature: 95℃

Product Code:  K300B

300b

AC/DC; low voltage electric shock can melt the needle instantly; mechanic cutting can melt
syringe body, double superheating protection is provided;
Surplus liquid in the syringe can be boiled off instantly and no pollution;
There will some electrical spark which is normal during melting;
Indicator light sparks during melting, showing the needle is under destroying, the whole process is finished in 1 to 3 seconds.

Specifications:
Power: AC 110V±10%/220V±10%; DC 6V
Melting method: melt with low pressure, high temperature; mechanic cutting of the body
Melting efficiency: take 20ml syringe body as reference, can melt syringe (ø1.2mm length 35mm) approximately 3 seconds; destroy the body within 4 seconds;
Working time: can destroyer around 240 continuously (take 20ml syringe body as reference)
Working noise:≤50 decibel
Electrode chip working voltage: AC 8V
Power: ≤130VA
Electrode chip superheating protection temperature: 85℃

Product Code: K300C

300c

Features:
AC; low voltage electric shock can melt the needle instantly; mechanic cutting can melt syringe body, double superheating protection is provided;
Surplus liquid in the syringe can be boiled off instantly and no pollution;
There will some electrical spark which is normal during melting;
Indicator light sparks during melting, showing the needle is under destroying, the whole process is finished in 1 to 3 seconds.

Specifications:
Power: AC 110V±10%/220V±10%
Melting method: melt with low pressure, high temperature; mechanic cutting of the body
Melting efficiency: take 20ml syringe body as reference, can melt syringe (ø1.2mm length 35mm) approximately 3 seconds; destroy the body within 4 seconds;
Working time: can destroyer around 240 continuously (take 20ml syringe body as reference)
Working noise:≤50 decibel
Electrode chip working voltage: AC 8V
Power: ≤130VA
Electrode chip superheating protection temperature:85℃

Product Code:  K310

310

Destroy disposable syringe to reject cross infection completely While melting the needle,
insert the needle into the melting hole, and then press down the syringe gently when the
needle touches the electrodes inside.

While the needle is being melted, there will be spark and the NEEDLE indicator will be
flashing for about three seconds, which is a normal phenomena;
It has the overheat protection function to protect machine work normally while melting the needle;Ozone disinfection function and alarm function when the drawer is full of residue;
The residual liquid in the needle will be vaporized instantly during melting, The “working indicator”
is flashed when melting the needle, which means the needle is being melted and the whole process
lasts 1-3 seconds;
While cutting the head of the syringe body, insert the syringe into the hole and pull the handle
to cut it off.
The whole process lasts 3 seconds.
Dealing with the waste residue:
There is a taphole at the bottom, under which there is a rubbish drawer to collect waste residue.
Please clean the rubbish drawer after using some time (usually after melting 50pcs of syringes).
Press the drawer gently at the bottom, which will flick automatically, then clean out the waste
residueand install again.

Product Code:  K320

320

This device is mainly designed for destroying the insulin needle as well as acupuncture needle and other micro-needles, taking only 1-2 seconds to melt needle easily .

Specifications:
-Easy to operate
-For home use only

●Medical Waste Package

Medical Waste Garbage Bag

Medical Waste Garbage Bag

Double Tie, Imported PE material
40cm×50cm×5
50cm×60cm×5
65cm×65cm×5
75cm×75cm×5
Common type, Imported PE material
30cm×40cm×5
40cm×50cm×5
50cm×60cm×5
65cm×65cm×5
75cm×75cm×5
85cm×85cm×5

Medical Waste Delivery Carton

Medical Waste Delivery Carton

60L,100L…

Imported PE material

Medical Waste Sharp Box

Medical Waste Sharp Box

1L,2L,4L,6.5L,8L,20L 23L

Using high-density polypropylene plastic, non-PVC components, with non-toxic, heat, cold, puncture resistance, earthquake, no leakage, easy to burn and so on.

Main features:
Collection of syringes, infusion needles and other disposable items.
Collection of small glass medical products, various types of blades, scalp, sharp needle and suture needles.
Vice-up the entire collection of blood, blood transfusion, etc. contact the blood of medical equipment.
Sharps boxes must be placed in other provisions of the medical sharps and other sharp dangerous goods.

Medical Waste Bin

Medical Waste Bin

15L,25L,30L,45L,70L

Imported PE material

Medical Waste Bin

Medical Waste Bin 2

1100L,1200L

Imported PE material

Medical Waste Bin

Medical Waste Bin 3

15L,25L,30L,45L,70L

Imported PE material

Medical Waste Label

Medical Waste Label 4

40cm(triangle)  stick type

 

 

●Smoke Emission Treatment

Clover supply optional dust wet scrubber system for waste incinerators. the main parts included wet cooling spray scrubber, wet dust filter and fog&waste separator.

This system is valid for mid-large scale waste incinerator. for small scale waste incinerator, supply dry scrubber(filter) chamber.

Smoke Emission TreatmentWet-Scrubber-System

 

This model is large-scale waste incineration equipment for large waste output. Construction is dual/double combustion chamber with 04 units oil burner, Continued Feeding incineration equipment. Waste feed chamber is around 4700Liters (4.7m3, YD-500W). Primary & Secondary combustion chambers and included mix-combustion chamber. Auto-Feeding load on the bottom of chamber. Incinerator panel control suit for local operation.

Continued-Feeding-Incineration-Equipment

Main Product List Primary Combustion Chamber
Secondary Combustion Chamber
Mix-Combustion Chamber
Wet Spray Scrubber
Wet Dust Scrubber
Cyclone Filter & Separator
Waste Conveyer System
Medical Waste Auto-Feeding & Shredder System
Incinerator Control Case
Chimney:10.0Meters
Italy oil burner: 04 units
Oil Tank: 500Liters